Each midi controller uses specific velocity values in order to display a specific colour on LED enabled inputs such as Pads.
In order for you to quickly and easily get the right feedback for your controller, we’re beginning to build a comprehensive list for different controllers here.
Leave comments below to add & request values for controllers not listed.
LED feedback options are available for all button mapping types.
In most cases you can add a custom 'on' and 'off' colour to it.
You may find that some mapping types, have more/different options. (A/B Track assign has 3 options, 1. when track is assigned to A, 2. when track is assigned to B, 3. when track is not assigned to any).
Also, session boxes have their own set of LED options for when clips are in a variety of different states.
Read this 'LED feedback for session boxes' article for details:
http://remotify.io/docs/tutorials/custom-led-feedback-your-session-box
NI Traktor F1 (controller must be in "indexed" mode)
REDOFF = 4
RED = 6
ORANGEOFF = 8
ORANGE = 10
LORANGEOFF = 12
LORANGE = 14
WYELLOFF = 16
WYELL = 18
YELLOWOFF = 20
YELLOW = 22
LIMEOFF = 24
LIME = 26
GREENOFF = 28
GREEN = 30
MINTOFF = 32
MINT = 34
CYANOFF = 36
CYAN = 38
TURQOFF = 40
TURQ = 42
BLUEOFF = 44
BLUE = 46
PLUMOFF = 48
PLUM = 50
VIOLETOFF = 52
VIOLET = 54
PURPLEOFF = 56
PURPLE = 58
PINK = 60
PINK = 62
FUCHSOFF = 64
FUCHS = 66
WHITEOFF = 76
WHITE = 127
APC Mini
Off = 00
Green = 01
Green Blink = 02
Red = 03
Red Blink = 04
Yellow = 05
Yellow Blink = 06
For the single color buttons the values are,,
Off = 00
On = 01
Blink = 02
Launchpad & Launchpad S
LED_OFF = 4
RED_FULL = 7
RED_HALF = 6
RED_THIRD = 5
GREEN_FULL = 52
GREEN_HALF = 36
GREEN_THIRD = 20
AMBER_FULL = 55
AMBER_HALF = 38
AMBER_THIRD = 21
Launch Control
LED_OFF = 4
RED_FULL = 7
RED_HALF = 6
RED_THIRD = 5
GREEN_FULL = 52
GREEN_HALF = 36
GREEN_THIRD = 20
YELLOW_FULL = 62
AMBER_FULL = 54
AMBER_HALF = 38
AMBER_THIRD = 21
Launch key
RED_FULL = 15
RED_BLINK = 11
GREEN_FULL = 60
GREEN_BLINK = 56
AMBER_FULL = 63
AMBER_HALF = 29
AMBER_BLINK = 59
Novation Impulse & Impulse 2
LED_OFF = 4
RED_FULL = 7
GREEN_FULL = 52
AMBER_FULL = 55
QuNeo
RED_HI = 127
RED_LO = 110
GREEN_HI = 40
GREEN_LO = 10
ORANGE_HI = 80
ORANGE_LO = 60
Hercules P32 DJ
LED_OFF = 0
RED_FULL = 125
RED_HALF = 21
RED_LOW = 11
BLUE_FULL = 126
BLUE_HALF = 61
BLUE_LOW = 41
PURPLE_FULL = 127
PURPLE_HALF = 101
PURPLE_LOW = 81
Livid OhmRGB/Slim
0=off
1-3=white
4-7=cyan
8-15=magenta
16-31=red
32-63=blue
64-126=yellow
127=green
Comments
Hi John,
You mention that leaving the value blank will use the default. I assumed you meant that it would remain the colour it was before, but I think I may be missunderstanding as my APC mini buttons all go green if I leave the value blank.
Any idea for an APC mini.
Cheers
Andy
Hi Andy,
By "use the default" I mean that the midi controller will revert to the colour it would usually display if nothing had been set at all.
Sorry for the confusion.
I'll see if I can find some values for the APC mini and post them up here.
Thanks
John
How not sure so many guys owns this controller, but can be useful :
Hercules P32 DJ
LED_OFF = 0
RED_FULL = 125
RED_HALF = 21
RED_LOW = 11
BLUE_FULL = 126
BLUE_HALF = 61
BLUE_LOW = 41
PURPLE_FULL = 127
PURPLE_HALF = 101
PURPLE_LOW = 81
Brilliant, thanks Nicolas
I'll add these to the list!
Regards
John
Hi John,
Thanks for your answer from the 04/22/17.
Sorry I`ve not got back to you sooner. Thanks for answering both my questions and I`m hoping I find time to explore this further on the weekend.
Regards
Andy
Any values for the AKAI MIDIMIX ? :)
I think the midimix buttons only have one colour.
Maybe "127" for on and "0" for off?
Hi John,
Will these values override the LED's on the midi fighter twister and if so do you have a list of the colours like the above?
Thanks Jeff
Yes they should override the colours on the twister.
I don't have a list for it but if you open the midi fighter utility, I'm pretty sure it gives you the velocity values of each colour in there.
John
Hey John,
LEDs working fine right now so far, but is it normal for them to not work when assigned to MIDI CH2 ?
Cheers :)
The midi channel needs to be the same as the button you are trying to "light up".
So if the button is on channel 1 then it will not work on channel 2.
I hope that helps.
John
Hi John,
somehow they do no light up, although buttons are all on the assigned MIDI channel (got that problem with Mute/Arm Rec/ Solo function).
Hey,
Sorry about the delay in my reply, I must have missed your comment.
In preferences > link/midi tab, have you turned "track" and "remote" on for both the input and out of your script/controller?
John
HI John, yeah, got both activated... sadly lights will only work on the first of the 2 Controllers...
Defaults for livid ohmRGB/slim
Sorry, img upload not working for me:
Livid OhmRGB/Slim
0=off
1-3=white
4-7=cyan
8-15=magenta
16-31=red
32-63=blue
64-126=yellow
127=green
Brilliant! thanks for the upload I'll add them to the original post :)
John
This should be helpful for the Novation Launchpad Pro and also the Launchpad MK2, which has the same colour table.
For the tKontrol F1 the buttons need to be set on "HSB".
Can we enter HSB values in Remotify?
How many of you ladies&gentlemen own and use the Xone:K2? How many are interested in sharing technical know-how about generating a script for the K2?
Unfortunately the K2 has a very peculiar MIDI implementation.
Regarding this thread topic, for example, it *DOESN'T* send/receive LED colours using note velocity values.
It uses different notes-values-sets for each one of the three allowed colours (red, yellow and green).
Using two K2s together is very tricky as well, to say the least, especially if you want to use them on a single USB port .
I easily managed to generate a very nice script using REMOTIFY.
As far as I know, there are no other templates/scripts around for the K2 which nears the functionalities I packed in mine using REMOTIFY :-)
But I am still *NOT* able to find a simple way to change a LED color dynamically using REMOTIFY.
Of course I can write a companion MAX device and/or a BOME MIDI Translator Pro set of rules, but I do not want to.
As somebody would say: "there would be too many moving parts" :-)
So far, for example, my clip button matrix has simply LED-OFF for a playing clip and LED-RED for a stopped clip. Again, I am still not able to manage a dynamic change of colour in such a MIDI implementation.
Coming back to where I started, if anybody wants to share know-how... I would be more that happy!
Nick
Here are some of the midi specs for the Akai APC mini..
For the grid the note on velocity values are,,
00 = of
01 =green
02 = green blink
03 = red
04 = red blink
05 = yellow
06 = yellow blink
For the single color buttons the values are,,
00 = of
01 = on
02 = blink
Enjoy
Brilliant! thanks Marcus :)
John
Here is a summary of my understanding of the Allen&Heath K2 MIDI implementation.
N
I just got an APC40 MKII and would love the color codes for it. I'm also wondering if it's possible to set up the LEDs to reflect the clip or scene color in Ableton. That way I can keep track of my clips and scenes as I scroll through the session box. It's a feature that works in the Akai script, but I'm not sure how I could do it through Remotify or combine aspects of both.
Thanks for the help!
Do a Google search like this: "akai apc40mkII midi implementation" to get the color codes info.
Working RGB button to velocity color map for the APC40 MK2.
Hello. Is there a way to keep the pads color based on the actual color of the clip assigned to it in ableton?
Anyone know LED feedback values for Alesis controllers? Specifically VX49 and Vortex 2 (Keytar)
From what i can see with live...
Midi Fighter Twister :
Value 0 = Blue
Value 25 = Cyan
Value 37 = Green - Blue
Value 43 = Green
Value 61 = Yellow
Value 69 = Orange
Value 78 = Red
Value 97 = Magenta
Value 113 = Purple
Value 117 = Blue
Value 127 = Orange
To complete the Midi Fighter Twister Value...
Correction for MFT :
Value 0 = Reset to Off position
Value 127 = Reset ton On position
NI Traktor F1 Color values for "indexed" mode
REDOFF = 4
RED = 6
ORANGEOFF = 8
ORANGE = 10
LORANGEOFF = 12
LORANGE = 14
WYELLOFF = 16
WYELL = 18
YELLOWOFF = 20
YELLOW = 22
LIMEOFF = 24
LIME = 26
GREENOFF = 28
GREEN = 30
MINTOFF = 32
MINT = 34
CYANOFF = 36
CYAN = 38
TURQOFF = 40
TURQ = 42
BLUEOFF = 44
BLUE = 46
PLUMOFF = 48
PLUM = 50
VIOLETOFF = 52
VIOLET = 54
PURPLEOFF = 56
PURPLE = 58
PINK = 60
PINK = 62
FUCHSOFF = 64
FUCHS = 66
WHITEOFF = 76
WHITE = 127
@ndebello13
I´m using the Xone K1 and i´m also looking for a way to get the LED color feedback i want. As i know the shift buttons use identifier+4 for amber and +8 for green, all other buttons are using +36 and +72 of the original Note number. Maybe its possible to manage that with midisend, like the NI Maschines scripts do for the HSB color buttons (they send values on 3 Midichannels).
Hello,
I can not get LEDs to work on my Launch Control. Buttons work as they should but the LED do not light up... (I did use numbers from John's first post).
Is there something I am missing?
Hey Guys,
First post here. Just a small heads up that following values will work for all Livid controllers that have RGB support and not just OHM. These are universal.
Livid OhmRGB/Slim
0=off
1-3=white
4-7=cyan
8-15=magenta
16-31=red
32-63=blue
64-126=yellow
127=green
Anyone knows if this is possible with komplete kontrol mk2?
What do you mean exactly with the Komplete Kontrol MK2? There are no Buttons with colored LED feedback. Just the Keyboard and as i know, you can use the komplete software (and Maschine) as a vst instrument in Live with full function + controls for Live anyways. I don´t see any need for customizing a Midikeyboard.
How can i set my traktor kontrol f1 to indexed mode? the colors always stay the same as i set it in the native instruments controller editor software, i can only turn the led on or off but i can´t change the color by sendiing velocity values.
Korg nanoKontrol2
Needs to be initialised in CC mode (To enable this mode, you will need to turn the unit on while pressing and holding down the SET MARKER and CYCLE buttons)
LEDs need to be set to external mode (activated in the Korg Kontrol editor) See screen capture
Transport
Stop button
Control type On/off On=127, Off=0
LED Feedback On=0, Off=127 (yes it's inversed)
Play button
Control type On/off On=127, Off=0
LED Feedback Default
Session record button
Control type On/off On=127, Off=0
LED Feedback Default
Mute
LED Feedback On=0, Off=127 (yes it's inversed)
I used the Korg Nanokontrol2 CC template by QDO found in this thread :
https://remotify.io/community/question/korg-nanokontrol-2-template
APC40 information can be found here: